4 Admin Procedures

4.1 Admin Procedure - «Structure»

Figure 4. To open this form in administrator mode, in the form, Figure 3, click on the Structure link.

Description of form fields:

The left column contains the tree-like menu of the site in the form in which this tree will be appear on the main page of the site. The tree serves to show the structure. This tree is completely determined by the contents of the second columns of the "Structure file" form.

The central column is the file editing field. The contents of this column can be edited by the administrator, and thus the administrator can change the structure of the site.

The “Guide” column contains a brief description of the procedure for working with the form.

The column "Messages" is used to display messages during the formation of the structure.

The “Save” button is used to save changes made to the file.

Link Accept changed site structure based on the contents of the structure file creates and / or deletes files, which, being an information base, reflect the structure of the site.

Description of structure file lines
Each of the lines of the structure file can:

Define a page

Define a group of pages

Define a subgroup of pages

Define a comment

determine the end of the file.
The structure may contain pages and / or groups and / or subgroups.
Each group may contain pages and / or subgroups.
Each subgroup may contain pages.
A page string outside a group or subgroup
If the line in the edit field starts with text, then it defines the page outside the group or subgroup.
Such a line should not be inside a group or subgroup.
Such a term may take the following format:

Just a page - [page name].

Page with tooltip - [page name] / [Tooltip text] (appears when placing the cursor on the page title text in the menu)

Page temporarily excluded from the structure (not shown in the menu) - [page name] / * [Tooltip text or page name].

Page with the changed name - [new name] = [old name] / ...
Group String
A group line has the following format: & gt; [group name] / [tooltip text].
A group must begin with a group line and end with a group line, or a page line outside a group or subgroup, or the end of a file.
Page line within the group.
If the line in the edit field starts with ^^^^ and is located behind the group line, it defines the page in the group.
This period may take the following format:

Just a page - ^^^^ [page name].

Page with tooltip - ^^^^ [page name] / [Tooltip text] (appears when placing the cursor on the page name text in the menu).

Page temporarily excluded from the structure (not shown in the menu) - [page name] / * [Help text or page name].

Page with the changed name - ^^^^ [new name] = [old name] / ...
To place the group in the horizontal menu bar after or instead of the pop-up prompt, enter the symbol /. For example:
> group_1 = group / modified group // - a group with the name group gets the name group_1 and is placed in a horizontal ruler on the main page of the site.
Subgroup String
A subgroup line has the following format: ^ & gt; [group name] / [Tooltip text].
A subgroup must begin with a subgroup line and end with a line for the next subgroup, or a page line outside a group or subgroup, or a group line, or the end of the file.
If the line in the edit field starts with ^^^^ and is located behind the line of the subgroup, then it defines the page in the subgroup.
Such a line can have the following format:

Just a page - ^^^^ [page name].

Page with tooltip - ^^^^ [page name] / [Tooltip text] (appears when placing the cursor on the page name text in the menu).

Page temporarily excluded from the structure (not shown in the menu) - ^^^^ [page name] / * [Tooltip text or page name].

Page with the changed name - ^^^^ [new name] = [old name] / ...
Comment
The comment line is each line beginning with the character *
End of file
The end-of-file line is a string of *** characters. This line should be the last in the structure file.

Changing the structure comes down to changing the structure file.

To delete a page, select the page line and delete it.

Adding an internal page. Choose a place to insert a page: To place a page outside a group or subgroup, select a place at the beginning or at the end of groups or subgroups. In the appropriate place in the structure file, insert an empty line and enter the line in the appropriate format.

Adding a page to a group or subgroup Choose a place to insert, for this, find the group or subgroup in the file and after the line of the group or subgroup insert an empty line before, after or inside the lines of the pages of the group or subgroup. In a blank line enter the page’s page in the appropriate format.

Deleting a group or subgroup. To delete a group or subgroup, select all the lines related to the group or subgroup and press “Delete”.

Change the page sequence of groups and subgroups. To change the sequence, move the lines of pages and / or groups and / or subgroups to the desired location and arrange them in the desired sequence in the structure file.

To change the name of a group, group, page in the corresponding line, change the name as follows: [new name] = [old name].
Warning! Name duplication is not allowed: group subgroup page, subgroup page, and pages outside the group or subgroup.
You cannot use a space in the names, replace the space with an underscore.
Attention! If you simply rename a group, subgroup, page, this will permanently delete the group, subgroup, page with old names and create a group, subgroup, page with new names.

After all changes to the structure file, click "save" and "Accept the changed site structure".

Print structure file
To print the structure file, click the “P” button.

4.2 Admin Procedure - «Main page»

4.3 Description of the main page

Figure 5-1. The main page of the site and its elements.

4.4 How to change the composition and content of the main page

Figure 5-2. To open this form in administrator mode, in the form of Figure 3, click the Change mainpage link.

Change the text of the substrate and the elements of the main page

Figure 5-3. To open this form, click Bgr.

• to select the text color and click the desired color;
• to select the background color, clear the check box and click the desired color;
• to select a picture as a background, click a picture;
• the selection is shown in the "Sample" field;
• If the selection satisfies click "choice."
• To change:
  • of all elements click "all";
  • the headers of the outer pages, click "header";
  • Content fields of external pages, click Content.
• To upload a picture:
  • click browse;
  • select the desired image as the background;
  • click Add.
• To delete a picture:
  • click a picture;
  • click Delete.
• To close the window, click “X”.

Changing images of the main page header

Figure 5-4. To open this form, click Img.

• click a picture to select a picture;
• the choice is shown in the "YOUR CHOICE" field;
• If the selection is satisfactory, click Accept.
• If you want to hide the picture, select the empty transparent picture empty.gif.
• To upload a picture:
  • click browse;
  • select the desired picture;
  • click Add.
• To delete a picture:
  • click a picture;
  • click Delete.
• To close the window, click “X”.

4.6 Admin Procedure - «Set start page and/or change administrator password»

Figure 7. The form for changing the administrator password and/or setting the start page. The form is opened from the form, Figure 3, by clicking on the link in the “Name” column, in the Administrator line. When you enter the password for the user (the subject of the site maintenance), a form opens, Figure 25, with access (display ) only those pages to which the administrator has allowed access for this user.

• To change the password, enter a new password in the Password field.
• To change the start page, uncheck the “Access” column and set the checkbox in the desired line.
• To accept the changed password and / or new start page, click the “Accept” button.
• If several start pages are marked in the “Access” column, the first page marked is accepted.

Sort objects.
1. The list of objects can be sorted by any column.
2. To sort in ascending order, check the “Ascending” box.
3. To sort in descending order, clear the “Ascending” checkbox.
4. Click the header, in 1 row, the column by which you want to sort.
5. To cancel sorting, click the selected column in the header (second click).

Navigation in objects.
1. To go to the end of the table, click the down arrow button.
2. To go to the beginning of the table, click the up arrow button.

Selection in objects.
1. Click the header, in line 2, the column by which you want to select.
2. In the "filter" field, enter a list of selection contexts.
3. A list of contexts, these are contexts separated by a "/" character.
4. Rows are selected by matching contexts from the list with any part of the text of the selected column.
5. Rows are selected for the number in order, according to the complete coincidence of the values of the number and the list of values.
6. To select, click “select”.
7. To cancel the selection, click cancel.

Printing Objects.
1. To print the table, click the P button.
2. Printing is subject to selection and sorting.

You can select the internal table for editing or downloading documents from the site
1. Open the site by clicking on the "Open" button.
2. In the website that opens, go to the page that you will edit
3. Click List of Internal Pages.
4. To edit, click “Edit” to load “Load”.

4.7 Admin Procedure - «Subjects»

Figure 8. Administrator function form “Subjects”. The form is opened from the figure 3 form by clicking on the Subjects link. 1 line - title, in the format: Short / Name / Password / Pages , 2 line - admin line! Do not delete these lines !!! To enter a new subject, insert an empty line anywhere from 2 lines. In the inserted line, enter the text: [short name of the subject] / [full name of the subject] // To change "Briefly" or "Name" in the desired line, edit. Columns: "Password", "Pages" are not edited and are filled automatically when creating access rights. Change or delete the necessary lines To sort the lines: copy them to any program (for example Excel), sort them, and paste them into the field through the system buffer. To accept the changes, click “Save." You can maintain the directory using any current editor.

4.8 Admin Procedure - «File Extensions for Downloading Images»

Figure 9. The form is opened from the form Figure 3, by clicking on the link Image Extensions .

4.9 Admin Procedure - «File Extensions for Downloading Document Files»

Figure 10. The form is opened from the form Figure 3, by clicking on the link File extensions for downloads .

4.10 Admin Procedure - "Mail" or reference designer "Mail"

Figure 11. The form is opened from the figure 3 form by clicking on the Mail link.

To enter a new address, insert an empty string at any place In the inserted line, enter the following text: [link text] = [mail address] for example: WEB master=globuss@jnline.ru Change or delete required lines To sort the rows: copy them to any program (e.g. Excel), sort, and through the system buffer paste into the field. To accept the changes, click Save. Attention ! The form does not control the correctness of entering the address and the presence of this address on the network! Deleting and / or changing a directory line does not result in deletion and / or changing the corresponding link on the page The reference book can be implemented by any text editor.

4.11 Admin Procedure - "Sites" or the reference designer of the "Sites"

Figure 12. The form is opened from the figure 3 form by clicking on the Sites link.

To enter a new address, insert an empty string anywhere In the inserted line, enter the following text: [site name] = [http address] for example: search server = http: //yandex.ru/ Change or delete required lines To sort the rows: copy them to any program (e.g. Excel), sort, and through the system buffer paste into the field. To accept the changes, click Save. Attention ! The form does not control the correctness of entering the address and the presence of this address on the network! Deleting and / or changing a directory line does not result in deletion and / or changing the corresponding link on the page The reference book can be implemented by any text editor.

4.12 Admin Procedure - Files or Files Designer Reference

Figure 13. The form is opened from the figure 3 form by clicking on the Files link.

To enter a new address, insert an empty string anywhere In the inserted line, enter the following text: [link text] = [fttp address] for example: my site files = fttp: //webcenter.ru/ Change or delete required lines To sort the rows: copy them to any program (e.g. Excel), sort, and through the system buffer paste into the field. To accept the changes, click Save. Attention ! The form does not control the correctness of entering the address and the presence of this address on the network! Deleting and / or changing a directory line does not result in deletion and / or changing the corresponding link on the page The reference book can be implemented by any text editor.

4.13 Create a new user and grant him access rights or change the password

The new user is created by the Administrator procedure “Subjects” Fig. 8.
After creating a new user, in administrator mode, in the form of Fig. 3, click the name of the new user in the “Name” column.
The form for changing the password and access rights will open, Fig. 7. In the “Access” column, mark the pages that should be accessible to the new user. In the Password field, enter the password for the new user or change the password of the previously created user. Click the Accept button.

4.14 Admin Procedure - «Text variables»

Figure 13-1. The form is opened from the form in Figure 3 by clicking on the Text Variables link.

1. click the "name" field, enter a name;
2. click the value field, enter a value;
3. click the "Save" button.

1. click the line;
2. click the "name" field, change the name;
3. click the value field, change the value;
4. click the "Save" button.

1. click the line;
2. click the "Delete" button.

1. click the "Cleaning" button.

Sort in a list.
1. The list can be sorted by any column.
2. To sort in ascending order, check the “Ascending” box.
3. To sort in descending order, clear the “Ascending” checkbox.
4. Click the header, in 1 row, the column by which you want to sort.
5. To cancel sorting, click the selected column in the header (second click).

Navigate in the list.
1. To go to the end of the table, click the down arrow button.
2. To go to the beginning of the table, click the up arrow button.

Selection in the list.
1. Click the header, in line 2, the column by which you want to select.
2. In the "filter" field, enter a list of selection contexts.
3. A list of contexts, these are contexts separated by a "/" character.
4. Rows are selected by matching contexts from the list with any part of the text of the selected column.
5. Rows are selected for the number in order, according to the complete coincidence of the number values ??and the list of values.
6. To select, click “Select”.
7. To deselect, click Cancel.

Print List.
1. To print the table, click the P button.
2. Printing is subject to selection and sorting.